Start with the serial number or VIN, then compare every surviving factory label, stamp and tag. The tools run entirely in this browser; nothing you enter is sent to BroncoFacts.
Identity is a comparison, not one lookup. A matching check digit only catches many transcription errors. A decoded code does not prove that a plate is original, that installed parts are factory equipment, or that a title is clean. On an early Bronco, the frame stamp—not a removable glove-box door—is the controlling identity evidence.
Tool 1
VIN or serial-number decoder
Supports the 11-character Ford scheme used through 1980 and the standardized 17-character VIN used from 1981 onward. It recognizes the full-size Bronco, Bronco II, modern Bronco and Bronco Sport.
The removable warranty plate adds original paint, transmission, rear-axle ratio and ordering district. Codes changed by model year, so select the year printed on the title or established from stronger evidence.
Read the fields before the codes
Warranty number
Series/body, factory-installed engine, assembly plant and production sequence. It is not a modern 17-character VIN.
W.B.
Wheelbase in inches. First-generation Bronco used a 92-inch wheelbase.
Color
Original exterior paint. Two characters can identify a two-tone treatment; special-paint orders may not resolve from the normal palette.
Model / body
Factory body/configuration code. U13, U14 and U15 in the warranty number mean Roadster, Pickup/Half Cab and Wagon; trim/package claims need supporting records.
Trans.
Factory-installed transmission code, not necessarily the transmission present today.
Axle
Factory rear-axle ratio and, for some codes, limited-slip status and capacity.
DSO
District Sales Office/order district. It is not the assembly plant. Extra digits can identify a special order.
Physical evidence
Where to find Bronco identifiers
1966–1977
Frame stamp + warranty plate
Look for the legal serial stamped into the passenger-side frame rail near the engine/firewall area. The removable glove-box warranty plate carries the build codes. Sources disagree about secondary plate locations on some survivors, so record every marking you find.
1978–1980
Frame/vehicle number + driver-door data plate
The 11-character scheme continued. Ford truck references place the build-data plate on the rear face of the driver’s door. Compare the stamped identity, plate, title and body—not just one removable door.
1981–1986
17-character VIN + door-latch label
The federal 17-character format begins for Bronco in 1981. Period references place the label on the latch face of the left front door.
1987–1996
Dash VIN + certification label
The legal VIN plate is visible through the driver-side windshield. The driver-door/door-jamb certification label adds manufacture date, ratings, paint, trim, transmission and axle information.
1984–1990 Bronco II
Dash VIN + certification label
Bronco II used a windshield-visible dash VIN throughout its run and has its own Ranger-derived line/body codes. Do not decode it with a full-size Bronco table.
2021–present
Dash VIN + driver-door-jamb labels
Modern Bronco and Bronco Sport use a windshield-visible VIN and Safety Compliance Certification labels. Also retain the tire/loading label and original window sticker; the VIN does not encode every option or package.
Beyond the VIN
Every other number worth recording
These identifiers answer different questions. They should be photographed in place before cleaning, rebuilding or replacing a component.
Safety certification label
Manufacture date, VIN, GVWR/GAWR, tire/rim information and generation-dependent paint, trim, transmission, axle and spring codes.
Use for: build date, load ratings and original configuration clues.
Axle tag and housing
A metal tag on a differential-cover bolt or housing markings can identify axle family, ratio, limited-slip status and build data. Compare it with the door/warranty-plate axle code.
Use for: detecting gear or complete-axle swaps.
Transmission tag or case
ID tags, case casting/engineering numbers, pan shape and control hardware distinguish units that share a generic “manual” or “automatic” description.
Use for: parts ordering and swap verification.
Transfer-case tag
The case tag or stamped model/assembly number identifies the transfer-case family and often a build or bill-of-material number.
Use for: drivetrain service and originality checks.
Engine casting and date codes
Block casting/engineering number, casting date, assembly markings and partial-VIN practices vary by engine and era. A casting number identifies a part family, not automatically the vehicle it was born in.
Use for: chronology and component-family verification.
Carburetor, distributor and calibration tags
Early induction/ignition tags and later under-hood emissions or calibration labels can narrow the original application and tune.
Use for: factory-correct restoration and emissions parts.
Buck/body/rotation markings
Assembly markings, body tags and build-sequence labels may survive on the cowl, core support, firewall or body. Their format is plant- and era-specific.
Use for: corroboration only; never substitute them for the legal VIN.
Window sticker, invoice and build records
These are the right evidence for packages and individual options the VIN does not encode. Compare VIN, order/body codes, dealer/district and dates across all records.
Use for: complete as-built equipment and provenance.
Important limit: BroncoFacts does not label a vehicle “matching numbers” or “authenticated” from a decoder result. Ford reused code letters, components are routinely swapped, reproduction plates exist, and a VIN does not encode every option.
Decoder sources and verification
The code tables are scoped by model year and source. Conflicts are not silently averaged.
Have a factory manual or surviving label that contradicts a code? Send the code, model year and source. Please transcribe the relevant characters instead of sending a complete VIN or personal document.